Regulation (EU) 2025/40

The PPWR and what it asks of manufacturers and suppliers

The EU Packaging and Packaging Waste Regulation has applied directly in every member state since 12 August 2026. It replaces Packaging Directive 94/62/EC and requires a conformity assessment, technical documentation and an EU declaration of conformity for every packaging placed on the market. This page sets out who is responsible for what and which documents result — with the references in the regulation itself.

Official title
Regulation (EU) 2025/40 on packaging and packaging waste
Published
OJ L, 2025/40 of 22 January 2025
Applies since
12 August 2026 (Art. 71)
Replaces
Directive 94/62/EC

Who carries which duty

The regulation draws a sharp line between the manufacturer, who places the packaging on the market, and the supplier, who supplies packaging or packaging materials to them. In practice this is where most of the questions arise.

The manufacturer — Art. 15

Before placing packaging on the market they carry out the conformity assessment under Art. 38, draw up the technical documentation under Annex VII and issue the EU declaration of conformity under Art. 39. By issuing it they assume responsibility for the packaging meeting the requirements (Art. 39(4)). They keep both on file: five years for single-use packaging, ten years for reusable packaging.

The supplier — Art. 16

They hand the manufacturer every piece of information and documentation needed to demonstrate conformity — including the technical documentation referred to in Annex VII, in a language the manufacturer readily understands. The regulation expressly allows both paper and electronic form. A supplier therefore issues no declaration of their own; they provide the basis for the manufacturer’s.

What belongs in the EU declaration of conformity

Art. 39 requires the declaration to follow the model structure in Annex VIII and to contain the elements of the relevant module in Annex VII. It is drawn up in a language required by the member state concerned and kept up to date. The model in Annex VIII names eight points:

  1. 1A unique identifier for the packaging.
  2. 2Name and address of the manufacturer and, where applicable, their authorised representative.
  3. 3The statement that the declaration is issued under the sole responsibility of the manufacturer.
  4. 4The object of the declaration: the packaging, described and identifiable for traceability.
  5. 5A reference to the other Union harmonisation legislation applied.
  6. 6The harmonised standards, common specifications or other technical specifications relied on.
  7. 7Where applicable: the notified body and the certificates it issued.
  8. 8Place and date of issue, name, function and signature.
Where packaging falls under several Union acts each requiring a declaration, Art. 39(3) requires a single declaration naming all of the acts concerned.

What belongs in the technical documentation

Annex VII describes the procedure as internal production control, Module A. The documentation must make it possible to assess conformity and must contain an analysis of the risks of non-conformity. It contains at least:

  • A general description of the packaging and its intended use.
  • Design drawings, manufacturing drawings and the materials of components.
  • The explanations needed to understand those drawings and how the packaging works.
  • A list of the harmonised standards, common specifications and other technical specifications applied — and, where none were applied, a description of the solutions adopted instead.
  • A qualitative description of how the assessments under Art. 6, 10 and 11 were carried out.
  • Test reports.

What is still to come

Not every requirement applied from day one. Two deadlines matter for the choice of materials and are already fixed:

Recyclability — Art. 6

All packaging placed on the market must be recyclable. Design for material recycling applies from 1 January 2030 or 24 months after the relevant delegated acts enter into force, whichever is later. The requirement to be recycled at scale applies from 1 January 2035, under the same proviso.

Minimum recycled content — Art. 7

From 1 January 2030, or three years after the relevant implementing act, minimum shares of post-consumer recycled plastic apply: 30 % for contact-sensitive PET packaging, 10 % for contact-sensitive packaging in other plastics, 30 % for single-use plastic beverage bottles and 35 % for all other plastic packaging. From 2040 those figures rise to 50, 25, 65 and 65 %.

Where it gets difficult in practice

The duties in Art. 15 and Art. 16 interlock: a manufacturer cannot issue their declaration until their suppliers have handed over the documents. Across a supply chain with many suppliers and many articles that is less a legal problem than an organisational one — collecting documents, telling revisions apart, knowing which revision a given customer actually received. That is what PackCert is built for.

How PackCert helps with this

Sources

Everything on this page comes from the official text of the regulation. The articles named can be read there:

Regulation (EU) 2025/40, full text on EUR-Lex

Retrieved 16 November 2026.

Not legal advice

This page summarises the text of the regulation. It replaces neither reading the original nor legal advice. Whether and how a requirement applies to a particular case depends on that case. PackCert assesses no conformity and issues no certificates — the platform manages documentation that manufacturers and suppliers declare themselves.